120kW hydrogen preheater
The hydrogen heater preheats the hydrogen gas introduced into the fuel cell stack, accelerating the start-up speed of the stack and quickly starting the hydrogen fuel cell vehicle.
The hydrogen heater preheats the hydrogen gas introduced into the fuel cell stack, accelerating the start-up speed of the stack and quickly starting the hydrogen fuel cell vehicle.
The hydrogen heater preheats the hydrogen gas introduced into the fuel cell stack, accelerating the start-up speed of the stack and quickly starting the hydrogen fuel cell vehicle.
The hydrogen heater preheats the hydrogen gas introduced into the fuel cell stack, accelerating the start-up speed of the stack and quickly starting the hydrogen fuel cell vehicle.
The hydrogen heater preheats the hydrogen gas introduced into the fuel cell stack, accelerating the start-up speed of the stack and quickly starting the hydrogen fuel cell vehicle.
The hydrogen heater preheats the hydrogen gas introduced into the fuel cell stack, accelerating the start-up speed of the stack and quickly starting the hydrogen fuel cell vehicle.
The hydrogen heater preheats the hydrogen gas introduced into the fuel cell stack, accelerating the start-up speed of the stack and quickly starting the hydrogen fuel cell vehicle.
The hydrogen reformer converts methanol, water, and other fuels through reforming heat exchange to produce hydrogen gas.
It is used for FGSS low-pressure system, with the general pressure of 6-8Bar to gasify the natural gas.
It is used for FGSS high pressure system, with a general pressure of 300Bar to gasify natural gas.
It is used for the cooling system of the natural gas compressor to control the temperature of the compressed natural gas.
The BOG treatment system for LNG ship and LNG terminal can re-liquify the LNG volatilized due to temperature rise during transmission to reduce the loss of natural gas.
It is used in the cooling system to cool natural gas through heat exchange between water or sea water and natural gas.
Heat exchange and cooling of natural gas and refrigerant shall be carried out to ensure safe transportation process.
In the cycle, the high-temperature carbon dioxide is heated to an even higher temperature to improve system efficiency.